»

[stachu100]

Originally Posted by delshay

http://www.fluke.com/fluke/usen/Ther....htm?PID=56188


my Bvision needs no cooling on the ram even at 100Mhz,above 100Mhz their start to get warm,but this is a on going project & will post when heatsink is needed when temperture is too high.

@delshay,
Are you really using this particular TIC?

[delshay]

Originally Posted by stachu100

@delshay,
Are you really using this particular TIC?

no

and if i did,im not that stupid enough to advertise it seeing how expensive it is. i was just pointing this out to easy john as something like this will detect all the hot spots on his card.