Register or have you forgotten your password?
|
|
Register or have you forgotten your password?
|
All times are GMT -6. The time now is 03:25 AM.
| Welcome to Forum, please register to access all of our features.
|
|
| General chat about Amiga topics This forum is for conversations which are specifically "Amiga" related, but don't fit into other categories. Contents of this forum do appear on the main page, unlike Talk About. If a subject appears to be non-related, it will be moved to Talk About. |
 |
|
|
Thread Tools | Display Modes |
11-14-2010, 12:46 PM
|
#1 | ||||||||
|
Beginner
Join Date: Dec 2009
Location: Madrid
Posts: 22
|
How to automount HDs with Cyberstorm
Hello amigans...
I haven't experience with SCSI. I have a CyberStorm 060/PPC and I want to install a SCSI HD. Using "Unit Control" (a Phase5 soft) I can see the HD: Board 0 Unit 15 Lun 0 ST380013 3AS 8.12 With the software SCSICONFIG, I can create partitions, set the boot partiton, etc ... I can't see the SCSI HD with hdtoolbox. The problem is: Now I must boot the amiga with an IDE HD, then use Unit Control and mount the SCSI HD manually. I want to boot from the SCSI HD. What I'm doing wrong? Thank you
__________________
A500+, A600, A2060, A1230, A4040 CR, A4000T PPC, CD32 v4 |
||||||||
|
|
|
11-14-2010, 12:58 PM
|
#2 | ||||||||
|
Merely Curious
Join Date: Jun 2010
Location: Sweden
Posts: 14
|
Re: How to automount HDs with Cyberstorm
The CSPPC uses "cybppc.device" for the SCSI.
Force, or select (depending on hdtoolbox version) that device and it should show up. Also check the SCSI-settings in the bootmenu by pressing "ESC" after a softreset. Maybe force "automount"?
__________________
A4000T CSPPC OS3.9/4.1 -- A3000 OS3.9 -- A1200 OS3.9 -- |
||||||||
|
|
|
|
11-14-2010, 01:03 PM
|
#3 | ||||||||
|
Beginner
Join Date: Dec 2009
Location: Madrid
Posts: 22
|
Re: How to automount HDs with Cyberstorm
In the CyberStorm's boot menu I can select the unit 15, but not the LUN0, the options are: NO-LUNs , LUN1, LUN2... etc and my HD is LUN0.
I'll try with cybppc.device in HDTOOLBOX.
__________________
A500+, A600, A2060, A1230, A4040 CR, A4000T PPC, CD32 v4 |
||||||||
|
|
|
|
11-14-2010, 01:11 PM
|
#4 | ||||||||
|
Banned
|
Re: How to automount HDs with Cyberstorm
Try changing the unit of the drive to 6
__________________
The Amiga.org Music Production Group Join the Google Amiga Map!! Click Here: Online petition - Support for whistleblowing nurse struck off by NMC |
||||||||
|
|
|
|
11-14-2010, 01:52 PM
|
#5 | ||||||||
|
Beginner
Join Date: Dec 2009
Location: Madrid
Posts: 22
|
Re: How to automount HDs with Cyberstorm
It works!
Now is set as Unit 6 - LUN 1... the real LUN is 0, but setting it as LUN 1 in the boot menu, works. What a difference! now my Amiga flies! Thank you Tension
__________________
A500+, A600, A2060, A1230, A4040 CR, A4000T PPC, CD32 v4 |
||||||||
|
|
|
|
| Bookmarks |
| Tags |
| automount , cyberstorm , hds |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
