|
Register or have you forgotten your password?
|
|
|
| Amiga Hardware Issues and discussion This forum is dedicated to the discussion and resolution of issues related to Classic and Next Generation Amiga hardware. Got a problem with a piece of hardware? Click to speak. |
![]() |
|
|
Thread Tools | Display Modes |
|
|
#1 | ||||||||
|
Banned
|
I put a newly formatted 3.9 SCSI HD into my A4000, so I could copy my Work partition across.
HDToolBox wont see the drive. It spins up and resets when I soft reset, so I know its definitely connected properly. Termination is enabled. It doesn't make sense - Surely HDToolBox should pick it up regardless. HDToolBox finds the 2nd.scsi.device, but when i scan, there`s nothing there. Can anyone help? It's been a while since i've messed about with Amiga hardware ![]() PS The drive works fine in my A3k...
__________________
The Amiga.org Music Production Group Join the Google Amiga Map!! Click Here: Online petition - Support for whistleblowing nurse struck off by NMC |
||||||||
|
|
|
|
|
#2 | ||||||||
|
Premium Member
|
Getting HD's to work in Amiga's sometimes is one of the more frustrating aspects to the damn things.
Are you 100% positive that the tooltype in HDToolBox is set to the proper SCSI card? Did you try un-terminating it? Don't laugh too loud... that's brought back drives from the dead for me. lol Also, what ROMS are you using in that A2091? Want to make sure they're 7's and maybe check the other jumper settings (there's 3 that are relevant to SCSI stuff I believe) while you're at it. Or are you saying the card AND drive work in your A3000?
__________________
Cash paid or will trade for loose and CIB Amiga games I need. Game manuals and boxes only too! Will purchase in large lots as well. |
||||||||
|
|
|
![]() |
| Bookmarks |
| Tags |
| hard , drive , a2091 |
| Thread Tools | |
| Display Modes | |
|
|