»

[HardStep]

Hi,
my A1200 has now more than 1 audio output from different devices (Paula and Delfina). I have a Y splitter audio cable adapter, so can i use this to merge the output from both devices into one amplifier input? Or is it going to damage the Amiga in any way?
Or should i use different cables for each device connecting to amp? Separate hardware mixer would be overkill i quess, money wise.
Thanks.

[tonyvdb]

Connecting bolth audio outputs to one sterio cable is not a good idea. It can cause unwanted signals to be forced back into the outputs. Your only inexspencive option if you want to be able to hear both at the same time is to get computer speaker system that has two inputs and use them as they will alow you to hear both sterio signals at the same time. Altec Lancing has several that do and so do Yamaha and some of the higher end Logitec speaker systems. You can sometimes get small mixers on ebay that would also do a great job like .this or This oneand also This one

[Chain]

http://www.aaroncake.net/circuits/mixer1.htm

or

http://amigakit.leamancomputing.com/catalog/product_info.php?products_id=485&osCsid=6760ab5144 bd38cc6a20c9ce438411c8

(dunno, it looks like just cables :-? )

[adonay]

i had one simmilair to this one here worked a charm with my delfina and you do not have to hack it that much i used to just mounted them by drilling hole in back of my 1200