|
Register or have you forgotten your password?
|
|
|
| Amiga Hardware Issues and discussion This forum is dedicated to the discussion and resolution of issues related to Classic and Next Generation Amiga hardware. Got a problem with a piece of hardware? Click to speak. |
![]() |
|
|
Thread Tools | Display Modes |
|
|
#1 | ||||||||
|
Defender of the Faith
![]()
Join Date: Sep 2005
Location: Los Angeles CA area
Posts: 1,581
|
Hope someone can help.
I purchased 3.1 rom chips for my 1200, so I could upgrade to OS3.5, but, then the cable for my HD fried, and now, the ami will boot up with floppies ok, but if I hook up a HD, the screen stays blank, and you hear an awful high pitched squeel. What's your diagnosis? Amiduffer |
||||||||
|
|
|
|
|
#2 | ||||||||
|
Beginner
![]()
|
@Amiduffer
A: you fried your HD B: You fried the IDE controller, (if thats possible) and your HD For your sake i hope its A: |
||||||||
|
|
|
|
|
#4 | ||||||||
|
Beginner
![]()
|
D: If you have done that then id say your IDE port definetly is fried. |
||||||||
|
|
|
|
|
#5 | |||||||||
|
Defender of the Faith
![]()
|
Quote:
From the HDD or a1200 mobo??
__________________
WinUAE Only... OS3.9 with 512mb ZIII ram
|
|||||||||
|
|
|
|
|
#6 | ||||||||
|
Kindred of Babble-on
![]()
Join Date: Dec 2003
Location: Serbia
Posts: 2,532
|
from motherboard????
__________________
You`re here, Noŷs. |
||||||||
|
|
|
|
|
#7 | ||||||||
|
Cult Member
![]()
Join Date: Oct 2002
Posts: 537
|
Sounds like the harddrive is dead, physical head crash or similar (heads against disks would cause this annoying noise, and also create an extra load on the power leads in the 44-pin 2.5" IDE-cable, possibly causing it to melt).
Try a new harddrive, and throw the dead one away immediately. -Paul |
||||||||
|
|
|
|
|
#8 | ||||||||
|
Defender of the Faith
![]()
Join Date: Sep 2005
Location: Los Angeles CA area
Posts: 1,581
|
Well, I guess it's the IDE controller that's dead.
I did get a new HD and cable, and it still does the horrible noise. Can anyone point out where the IDE controller is, and how to fix it, if possible? Is there any reason nobody answers the Telephone at Software Hut or Mr. Hardware? Amiduffer!! |
||||||||
|
|
|
|
|
#9 | ||||||||
|
Kindred of Babble-on
![]()
Join Date: Feb 2002
Posts: 2,828
|
Does not sound good :-( But where does this sound come from? and also maybe try a different psu.
|
||||||||
|
|
|
|
|
#10 | |||||||||
|
Technoid
![]()
|
Quote:
I'd look into the PSU as someone already mentioned as well, they can squeal if things get shorted sometimes. Good Luck! |
|||||||||
|
|
|
|
|
#11 | |||||||||
|
Premium Member
Join Date: May 2004
Location: Maryland - U.S.A.
Posts: 1,955
|
Quote:
|
|||||||||
|
|
|
|
|
#12 | ||||||||
|
Defender of the Faith
![]()
Join Date: Sep 2005
Location: Los Angeles CA area
Posts: 1,581
|
>I'd look into the PSU as someone already mentioned as well
What is a PSU, and where is it located? The sound, as far as I can tell, is coming from the left side of the A1200. Amiduffer |
||||||||
|
|
|
|
|
#13 | ||||||||
|
Technoid
![]()
|
The PSU is the (external) power supply (Power Supply Unit).
If you hear the squealing from inside the machine though, it does sound like *something* is not happy in there... possibly something near the IDE connector. |
||||||||
|
|
|
|
|
#14 | ||||||||
|
Technoid
![]()
Join Date: Jun 2004
Posts: 397
|
I don't mean to ask dumb questions, but I'm going to just in case:
Are you making sure not to slide the cable over the seperate 4 pins off to one side? Are you sure the cable isn't plugged in with hard drive upside down (some drives have connector upside down)? Did you make sure you aligned it and didn't "miss" two pins on either side? Sorry to hear you think you might have killed the ide port. I feel your pain.
|
||||||||
|
|
|
|
|
#15 | ||||||||
|
Defender of the Faith
![]()
Join Date: Sep 2005
Location: Los Angeles CA area
Posts: 1,581
|
>Are you making sure not to slide the cable over the >seperate 4 pins off to one side? Are you sure the cable >isn't plugged in with hard drive upside down (some drives >have connector upside down)? Did you make sure you aligned >it and didn't "miss" two pins on either side?
>Sorry to hear you think you might have killed the ide >port. I feel your pain. Well, let's see, I've tried a few combinations, I booted from floppies, with, and without the Blizzard 040/50mhz with no problems. I tried booting with HDD and Blizzard, just to see if it's just lack of power from the stock A1200PSU, *squeal*, then just HDD and no Blizzard *squeal*. Yes, it isn't covering the 4 pins off to the side, I'm pretty sure it isn't upside down. What in particular, do you mean about "miss" two pins on either side?? Gad, I'd hate to lose this one! Amiduffer |
||||||||
|
|
|
![]() |
| Bookmarks |
| Tags |
| work , a1200 |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Will this work on A1200? | stefcep2 | Amiga Hardware Issues and discussion | 2 | 12-27-2008 05:06 AM |
| Will this work with my A1200? | rja4096 | Amiga Hardware Issues and discussion | 2 | 03-25-2008 04:11 AM |
| would this HD work in my A1200 | rja4096 | Amiga Hardware Issues and discussion | 2 | 07-12-2007 08:36 AM |
| PCMCIA and USB on A1200, would it work? | Argus | Amiga Hardware Issues and discussion | 19 | 02-24-2005 07:32 PM |
| Why won´t a pcmcia USB 2.0 pc card work in an A1200 ?? Or does it work ??? | Effy | Amiga Hardware Issues and discussion | 15 | 02-24-2004 12:03 AM |