»

[3246251196]

Hi,

- I have installed EasyNet. I am able to ping from pc to amiga 1200 and vice versa

- Connection through the main router

- I have followed these guide lines on (http://eab.abime.net/showthread.php?t=59643):

I can confirm that EasyNet file sharing will work with Windows 7

Here are the settings I use in:

> Control Panel > Network and Internet > Network and Sharing Center > Advanced sharing settings

o Turn on file and printer sharing
o Turn on sharing so anyone with network access can read and write files in the Public folders
o Enable file sharing for devices that use 40- or 56-bit encryption
o Turn off password protected sharing

I use a regular IPv4 address (static) for ease of connection and have a folder which is called Shared which the Amiga connects to with a guest account from EasyNet

- My router status page shows the amiga's static ip on connected devices; its device name: "unknown"

- The port two ethernet light is a flashing orange (the port into the amiga from is attached)

- The light on the 3Com adaptor is a solid green

- When I use ConfigHelp everything looks fine in there, I have used the correct gateway, the correct mask, i have chosen a hostname BUT i am unsure on how to get my network domain name - is it fine to use aol.com given that is used in the ISP based email address?

- The domain name servers are correct and I am using primary

- TCPIP settings MAXMEM set 256Kb, true: loopback, Debug SANA, Gateway mode

- Hosts comes up as the static ip of the pc with its name. though, I did need to manually add this; it said in the guide that you should have a loopback immediately when you open up the Hosts Manager. I did not.

Thank you for looking. Any help?

[3246251196]

Well, there still exists the issue in the preceding post. But now, I have taken further steps back to getting this up and running.

For a reason, I wiped the HDD and reinstalled 3.1;

I installed the device drivers that came with the diskette.

I then installed EasyNet - just like I had done before. Everything installs fine until it asks me to register. Then, the "EasyNet Registration" GUI shows up and crashes the system. I have tried uninstalling by booting with no startup sequence and even on reinstallation this is happening. It did not happen the first time. The only thing that is different is that I am already registered due to the first installation.

So maybe after this new problem is sorted out, I can get back to the original one.

[Thomas]

Originally Posted by 3246251196

Thank you for looking. Any help?

Erm, help with what? You only list things that do work, there is not a single word about what does not work. So where is your problem?

[3246251196]

Hey, the problem is that the gui crashes when it comes to the registration process.

[Thomas]

This is a commercial product with support. Open a ticket at AmigaKit.

[3246251196]

Thanks, will do.

[3246251196]

This certainly is the right place to ask these questions. Amiga support will not reply, maybe they are busy or whatever, but now it has been approx. 3 months. I am not desperate, because I have been busy with other things in life, but I just want this sorted out once and for all, and it will likely be a an error on my part which is easy to be picked up by one of you:

===MESSAGE TO AMIGA SUPPORT===
Everything is installed once more; I sent this message to AmigaKit support ticket:

===

Hi,

I am able to ping my PC device using the amiga.

When I go into Host Manager I have to manually add my PC device, which I do. Then, I "Connect to..":

1. Whenever I click on the drop down box named "Share" the system crashes.
2. I ignore Share. I enter "WORKGROUP" in Workgroup (as this is what it is called according to Properties of Computer on Windows 7)
I enter "guest" as use
ame and I enter "none" as password. Then, I click "Connect". But I keep on getting the error: Socket access from rjd-PC denied! rjd-PC being the name of my PC.

What am I doing wrong here? Is it a some data field I have given wrong information to? Is it a problem on the PC end? The router end?

Please, help.
Thanks.

===

So, I am getting a socket access denied error, and when I click on the drop down box the system crashes. Additionally my config help file:

===

++ EasyNet Information ++

Version =
File Size = 394336 bytes
bsdsocket.library = unknown


++ Network Settings ++

Your IP address = 192.168.0.100
Network Mask = 255.255.255.0
Router/Gateway IP = 192.168.0.1
Your hostname = amiga
Network domainname = as43234.net


++ Domain Name Servers ++

Primary DNS = 92.31.242.20 (in use)
Secondary DNS = 92.31.242.21
Tertiary DNS =


++ Network Interface ++

Device = 3c589.device (version 1.4 installed)
Unit Number = 0
Wireless Settings = pccard.library (version 1.1 installed)
Library = pccard.library (version 1.1 installed)


++ TCPIP Settings ++

MBUF_CONF MAXMEM = 256K
Use Loopback = Yes
Debug SANA = No
Gateway Mode = Yes


++ Hosts ++

192.168.0.5 rjd-PC
192.168.0.1 NETGEAR

++ Assigns ++

Assign AmiTCP: "Work:AmiTCP"

===

Some notes:

- I had to manually add all the hosts, even though the manual says I should start off with a loop back - there was originally nothing in the host manager.

- When I go to download updates it says it cannot connect to the server. I check my DNS addresses on my router status page, however.

Help, please: I can ping devices, but I just cannot connect to them or seem to download any updates.

===END OF MESSAGE===

[RMK305]

I would try Miami. I've been trying to get Easynet online for months and am getting nowhere with it.

[davideo]

The update server for Easynet has changed address.

You can ask for a update floppy from AmigaKit to update your Easynet to the latest version. I had to do this to get mine to work with my USB Network adaptor.

Dave G

Edit: I found Easynet a lot easier to set up than Miami.