|
Register or have you forgotten your password?
|
|
|
| Amiga Hardware Issues and discussion This forum is dedicated to the discussion and resolution of issues related to Classic and Next Generation Amiga hardware. Got a problem with a piece of hardware? Click to speak. |
![]() |
|
|
Thread Tools | Display Modes |
|
|
|
|
#1 | ||||||||
|
Technoid
![]()
Join Date: Aug 2010
Location: UK
Posts: 191
|
I've just picked up an A500 1.3 and the original owner stated it was in working order. Aside from the fact I only paid £11 for it the modulator only outputs in black and white (tested modulator with a working A600). I have tried tuning the A520 using all 3 turny things inside it but no luck.
Does anybody know what the fault is? If it's not fixable I'm willing to swap for parts I have (A500 mice, PSUs, floppy disk drives, blank disks, Commodore 1084 monitor lead - these things are rare ) for a working PAL A520.
__________________
A600 (3.84 MIPS) - 2MB Chip, 4MB PCMCIA, 11MB Fast, ACA-620 680EC20@16.67MHz, RTC, 512MB CF HD, WB 2.1 A1200 (7.36 MIPS) - 2MB Chip 8MB Fast, MTEC Viper 68030@42MHz MMU, 68882 FPU, RTC, 1GB CF HD, T.Turbo 2, 2 Ext. Floppies, WB 3.0. Atari 520 STFM (0.9 MIPS est.) 1MB, Multiface ST. ZX Spectrum +2A (0.24 MIPS) - 128KB, Custom 3'5 External Floppy. ZX Spectrum +3 (0.24 MIPS) - 128KB, DivIDE+ 64MB CF HD, Multiface 3. |
||||||||
|
|
|
|
|
#2 | ||||||||
|
Technoid
![]()
Join Date: Jan 2008
Location: Boston, UK
Posts: 394
|
I could loan you a working modulator for you to try?
Where abouts are you in the UK? Dave G
|
||||||||
|
|
|
|
|
#3 | ||||||||
|
Technoid
![]()
Join Date: Aug 2010
Location: UK
Posts: 191
|
Bolton. I'm 85% certain it's only the modulator at fault.
__________________
A600 (3.84 MIPS) - 2MB Chip, 4MB PCMCIA, 11MB Fast, ACA-620 680EC20@16.67MHz, RTC, 512MB CF HD, WB 2.1 A1200 (7.36 MIPS) - 2MB Chip 8MB Fast, MTEC Viper 68030@42MHz MMU, 68882 FPU, RTC, 1GB CF HD, T.Turbo 2, 2 Ext. Floppies, WB 3.0. Atari 520 STFM (0.9 MIPS est.) 1MB, Multiface ST. ZX Spectrum +2A (0.24 MIPS) - 128KB, Custom 3'5 External Floppy. ZX Spectrum +3 (0.24 MIPS) - 128KB, DivIDE+ 64MB CF HD, Multiface 3. |
||||||||
|
|
|
|
|
#4 | ||||||||
|
Technoid
![]()
Join Date: Jan 2008
Location: Boston, UK
Posts: 394
|
If you're willing to pay postage both ways - I can loan you a known working modulator to test your theory with.
Dave G
|
||||||||
|
|
|
|
|
#5 | ||||||||
|
Technoid
![]()
Join Date: Aug 2010
Location: UK
Posts: 191
|
For anyone else with the same fault - the modulator was duff. I picked another up from ebid for £5 incl. postage, rehoused the internals into the original 520 (better enclosure).
Now how much could I get for a working, non yellowed, boxed 1MB PAL A500 1.3 and extra boxed games (UK postage only) ? No Workbench disks tho ![]() BTW did the 1.3 A500 ever come in the Cartoon Classics pack - I know the Plus was swapped when C= started running out of A500 stock but was the change over in this set?
__________________
A600 (3.84 MIPS) - 2MB Chip, 4MB PCMCIA, 11MB Fast, ACA-620 680EC20@16.67MHz, RTC, 512MB CF HD, WB 2.1 A1200 (7.36 MIPS) - 2MB Chip 8MB Fast, MTEC Viper 68030@42MHz MMU, 68882 FPU, RTC, 1GB CF HD, T.Turbo 2, 2 Ext. Floppies, WB 3.0. Atari 520 STFM (0.9 MIPS est.) 1MB, Multiface ST. ZX Spectrum +2A (0.24 MIPS) - 128KB, Custom 3'5 External Floppy. ZX Spectrum +3 (0.24 MIPS) - 128KB, DivIDE+ 64MB CF HD, Multiface 3. Last edited by brownb2; 12-21-2010 at 06:43 AM.. |
||||||||
|
|
|
![]() |
| Bookmarks |
| Tags |
| black and white , a520 , fault , pal , trade , working , modulator , grayscale , a500 |
| Thread Tools | |
| Display Modes | |
|
|