»

[pkupcik]

I'm trying to insert a new GVP-M Typhoon 32MB accelerator card into my A1200 via the bottom expansion door and am having problem fitting it in. I was able to connect it to the expansion port, but it looks like the card is too thick and I'm not able to close the bottom door. The SIMM card module protrudes about 1mm outside of the window. The card is sitting on top of the plastic guards that are inside of the expansion door.

I see that many of you here have the same card. Did you also have problems fitting it in? How did you fix it?

Here's the card for your reference.
http://www.softhut.com/cgi-bin/test/...=9226696_10762

Thank you.

[gertsy]

Originally Posted by pkupcik

I'm trying to insert a new GVP-M Typhoon 32MB accelerator card into my A1200 via the bottom expansion door and am having problem fitting it in. I was able to connect it to the expansion port, but it looks like the card is too thick and I'm not able to close the bottom door. The SIMM card module protrudes about 1mm outside of the window. The card is sitting on top of the plastic guards that are inside of the expansion door.

I see that many of you here have the same card. Did you also have problems fitting it in? How did you fix it?

Here's the card for your reference.
http://www.softhut.com/cgi-bin/test/...=9226696_10762

Thank you.

I am sure I have seen other users post the same issue. I did a search but could'nt find anything.
You might have to take the top off and the keyboard for easier access. Thicker cards are hard to slot in. The benefit though is once they are in they don't move about.

I'm sure someone who has bought one can offer some advice. Bump....

Gertsy

[bbond007]

Originally Posted by pkupcik

I'm trying to insert a new GVP-M Typhoon 32MB accelerator card into my A1200 via the bottom expansion door and am having problem fitting it in. I was able to connect it to the expansion port, but it looks like the card is too thick and I'm not able to close the bottom door. The SIMM card module protrudes about 1mm outside of the window. The card is sitting on top of the plastic guards that are inside of the expansion door.

I see that many of you here have the same card. Did you also have problems fitting it in? How did you fix it?

Here's the card for your reference.
http://www.softhut.com/cgi-bin/test/...=9226696_10762

Thank you.

I have the same card. You need to trim the plastic ledge on the bottom of the trapdoor. Be careful not to cut yourself.

[som99]

Now is a golden opportunity to build yourself a A1200 tower

[Amiduffer]

Is your SIMM the type that has chips on both sides, or only on one side? Back when I had an A1200 and Blizzard, I could only find a SIMM with chips on both sides, which caused the improper fitting and the cover to not quite fit. Once I found the other type of SIMM, it fit OK.

[pkupcik]

The SIMM chip is two sided and interferes with the door. The SIMM socket is also to tall and interferes with the door as well. It's about 1mm too tall.

[pkupcik]

Originally Posted by bbond007

I have the same card. You need to trim the plastic ledge on the bottom of the trapdoor. Be careful not to cut yourself.

What do you think about opening the Amiga and installing the GVP card under the plastic hinge instead of removing it?

Do I need to worry about the bottom of the GVP card touching the metal bottom of the expansion bay?

[scuzzb494]

Originally Posted by pkupcik

What do you think about opening the Amiga and installing the GVP card under the plastic hinge instead of removing it?

Do I need to worry about the bottom of the GVP card touching the metal bottom of the expansion bay?

I often leave the plastic cover off anyway. You often had to mod the lip to the cover to get it back on. The makers of these cards really tried to cram as much in. I also often open the Amiga and fit from inside. If your worried about touching the shielding with the card just run a bit of insulating tape across those circuit spots and the shielding. I have done so many mods to the cover including drilling holes in it. It will work you just need to be creative.

scuzz

[bbond007]

Originally Posted by pkupcik

What do you think about opening the Amiga and installing the GVP card under the plastic hinge instead of removing it?

Do I need to worry about the bottom of the GVP card touching the metal bottom of the expansion bay?

if this is the board you have:

http://amiga.resource.cx/photos/taifun2,1

All you need to do is simply trim the trapdoor down. The board will fit nice and snug with the trapdoor on.

I would really worry about extra stress on the expansion connector and the possibly short if you mounted the board differently. You may need a lower profile SIMM.

Mine evan has the SCSI...

[pkupcik]

Originally Posted by bbond007

if this is the board you have:

http://amiga.resource.cx/photos/taifun2,1

All you need to do is simply trim the trapdoor down. The board will fit nice and snug with the trapdoor on.

I would really worry about extra stress on the expansion connector and the possibly short if you mounted the board differently. You may need a lower profile SIMM.

Mine evan has the SCSI...

Yes that's the card I have. When I insert the card in, the SIMM Holder/Slot and the SIMM card itself protrudes about 1-2mm above the area where the bay door would be. Trimming the door would probably not help, I would literally have to make a hole in the door as the GVP card protrudes higher than where the door would sit. I emailed the place where I bought it (SoftHut) and they're going to check with the manufacturer. They were surprised as well.

[bbond007]

Originally Posted by pkupcik

Yes that's the card I have. When I insert the card in, the SIMM Holder/Slot and the SIMM card itself protrudes about 1-2mm above the area where the bay door would be. Trimming the door would probably not help, I would literally have to make a hole in the door as the GVP card protrudes higher than where the door would sit. I emailed the place where I bought it (SoftHut) and they're going to check with the manufacturer. They were surprised as well.

I got mine from SoftHut as well.

anyway, not that i don't believe you.

http://www.hogranch.com/bbond007/A12...apdoorOpen.jpg
http://www.hogranch.com/bbond007/A12...00Trapdoor.jpg