|
Register or have you forgotten your password?
|
|
|
| Amiga Hardware Issues and discussion This forum is dedicated to the discussion and resolution of issues related to Classic and Next Generation Amiga hardware. Got a problem with a piece of hardware? Click to speak. |
![]() |
|
|
Thread Tools | Display Modes |
|
|
|
|
#1 | ||||||||
|
Defender of the Faith
![]()
Join Date: Sep 2005
Location: Los Angeles CA area
Posts: 1,581
|
I've got an A4000 now, and its a basic setup, 3.0ks, bare OS3.0, Toaster, & 3640.
Adding a CDdrive is my immediate goal at the time. I've got a couple of them here in the office although they're both 7" long, and its darn cramped in that tiny space and don't see how you can fit it and the HD since the power connectors of both bump into each other. Are there smaller drives around? Whats the basics of using IDE in the 4000? Do you set the master, slave, or cable select jumper on the drive? What unit # do you put on the CD0 icon. I have the CDFS program and tried to install it last night, but when it asked for a unit number, I didn't know and aborted the installation in a panic, not wanting to screw things up. Give me a step by step please. Thanks.
__________________
Amiga 3000D UP and running! Hear that clicking. 8) Amiga 3000D & 4000D in storage sadly. |
||||||||
|
|
|
|
|
#2 | ||||||||
|
Premium Member
Join Date: Nov 2005
Posts: 8,666
|
Master/slave jumper depends what else is connected. Assuming it's connected to the internal IDE connector along with a HDD set to master, then the CD-ROM will be slave. You need to install IDEFix, then change CD0 to use atapi.device. Then set the unit to 0 if the drive is master or 1 if the drive is slave (assuming it is on the internal IDE connector not some other interface with two channels - in which case on the second channel you use unit 2 for master and 3 for slave).
As for the depth - yes it's tough to fit it in due to the PSU getting in the way. You will ahve to look around for a shorter one, or hack the PSU like I did :-) -- moto
__________________
Code:
10 IT'S THE FINAL COUNTDOWN 20 FOR C = 1 TO 2 30 DA-NA-NAAAA-NAAAA DA-NA-NA-NA-NAAAA 40 DA-NA-NAAAA-NAAAA DA-NA-NA-NA-NA-NA-NAAAAA 50 NEXT C 60 NA-NA-NAAAA 70 NA-NA NA-NA-NA-NA-NAAAA NAAA-NAAAAAAAAAAA 80 GOTO 10 |
||||||||
|
|
|
|
|
#3 | ||||||||
|
Premium Member
Join Date: Nov 2005
Posts: 8,666
|
As for the HDD power connectors bumping, if you undo the 4 screws holding the HDD bracket on then you can take the HDD out. Then undo the four screws holding the HDD on to the brackets. Then you can flip the disk over so the power connector is on the other side. The disk will be upside down so you will have to flip the IDE connector, but this shouldn't be a problem if the cable is long enough.
-- moto
__________________
Code:
10 IT'S THE FINAL COUNTDOWN 20 FOR C = 1 TO 2 30 DA-NA-NAAAA-NAAAA DA-NA-NA-NA-NAAAA 40 DA-NA-NAAAA-NAAAA DA-NA-NA-NA-NA-NA-NAAAAA 50 NEXT C 60 NA-NA-NAAAA 70 NA-NA NA-NA-NA-NA-NAAAA NAAA-NAAAAAAAAAAA 80 GOTO 10 |
||||||||
|
|
|
|
|
#4 | ||||||||
|
Defender of the Faith
![]()
Join Date: Sep 2005
Location: Los Angeles CA area
Posts: 1,581
|
Great! Lots of usefull information. Thank you. :-)
__________________
Amiga 3000D UP and running! Hear that clicking. 8) Amiga 3000D & 4000D in storage sadly. |
||||||||
|
|
|
|
|
#5 | ||||||||
|
Premium Member
Join Date: Nov 2005
Posts: 8,666
|
No worries mate. Keep us up to date :-)
-- moto
__________________
Code:
10 IT'S THE FINAL COUNTDOWN 20 FOR C = 1 TO 2 30 DA-NA-NAAAA-NAAAA DA-NA-NA-NA-NAAAA 40 DA-NA-NAAAA-NAAAA DA-NA-NA-NA-NA-NA-NAAAAA 50 NEXT C 60 NA-NA-NAAAA 70 NA-NA NA-NA-NA-NA-NAAAA NAAA-NAAAAAAAAAAA 80 GOTO 10 |
||||||||
|
|
|
|
|
#6 | ||||||||
|
Desperately needs a life
![]()
|
Get a Lite-On CDRW drive, they are real short and work fine in the 4000, even with MakeCD. IDEFix97 works great too.
__________________
Going Bananas over AMIGAs since 1987... Looking for Fusion Fourty PNG ROMs V3.4?
|
||||||||
|
|
|
|
|
#7 | ||||||||
|
Technoid
![]()
|
Give it a laxative!!!!
Sorry... couldn't resist! :-D
__________________
-=>The RoadRunner<=- A2000 030/40Mhz, 8Mb RAM, 1GB HD AmiKit |
||||||||
|
|
|
![]() |
| Bookmarks |
| Tags |
| run , make , drive , 4000 |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Amiga 4000 Hard Drive Issue | Managarm | Amiga Hardware Issues and discussion | 5 | 04-11-2008 05:34 PM |
| What size is the Drive Bay in the Amiga 4000 desktop? | vamigan | Amiga Hardware Issues and discussion | 2 | 12-14-2007 10:13 PM |
| Amiga 4000 & 2nd 1.76MB Disk Drive | jimbo100 | General chat about Amiga topics | 4 | 05-27-2007 03:30 AM |
| Amiga 4000 - How to add a CDROM Drive? | ShawnDude | Amiga Hardware Issues and discussion | 2 | 01-04-2005 07:06 PM |
| Amiga 4000 tower drive rails | Morley | Amiga Hardware Issues and discussion | 1 | 04-01-2004 02:20 PM |