Thread: My 500+ Project
View Single Post
Old 06-20-2012, 05:25 PM   #40
Cult Member
Points: 5,438, Level: 47 Points: 5,438, Level: 47 Points: 5,438, Level: 47
Activity: 5% Activity: 5% Activity: 5%
djos's Avatar
Join Date: Jun 2012
Location: Melbourne, Australia
Posts: 929
Default Re: My 500+ Project

Originally Posted by Azryl View Post
That lifted trace, you might want to see where it starts and solder a wire link from source to socket pin.

Insert Gary and see if the machine boots. The trace might look solid and connected along its length but more than likely there is a break in it.

Good idea, thankfully I have some fine stiff wire lying around from a c64 reset switch mod. ATM I don't even get the insert disk screen likely due to the Gary chip feet needing more of a clean than I've given them.
Amiga 1200 w/ KS1.3, ACA1220 16Mhz 128MB w/ RTC, 4GB CF-HDD, a1011 External FDD
Amiga 500 w/ KS1.3, 512k Chip-Ram, 512k Slow-Ram, 4MB Fast-Ram, FDD Boot Selector, HxC RevC SD Floppy Drive, a1010 External FDD
Commodore 64 w/ 1541 Ultimate-II inc Tape Adapter, JiffyDOS, 1541 Disk Drive, 1531 Datasette, C64 Flyer Net Modem, ZoomFloppy
djos is offline   Reply With Quote