PDA

View Full Version : A500+ problems - is it dead?


r_welfare
07-02-2004, 11:50 AM
Hi all

I have an A500+, bought from a car boot sale. I can't get a picture on my TV with it though.

My questions are:

1. Could it be the modulator? I have plugged it in and tried the aerial cable in both the rear port and the "Video Out" port, but no success.

2. The disk drive doesn't click when there is no disk - symptomatic of bigger problems?

3. Potentially on the plus side - the Caps Lock key light flashes when I press Ctrl-Amiga-Amiga.

Do you think the thing is too far gone, or is it a simple fault?

BoingBoss
07-02-2004, 03:14 PM
Hi r_welfare,

First try hooking up a normal video cable (RCA to RCA) from the Amiga 500s Composite video out to your TVs video in. You should see a grey-scale picture (b/w). If this does not work then open up your Amiga 500 and press down on all of the socketed chips.

HopperJF
07-02-2004, 04:02 PM
Is your TV tuned into Channel 36?

r_welfare
07-03-2004, 12:13 PM
Gentlemen

Thanks for the tips. Opened the machine up today (with the help of a 1200-owning knowledgeable friend), and lo and behold someone had fitted a ROM switcher, but managed to put the ROM chips in the wrong way round (we believe), either way the ROM chips were completely fried (charred on the tops). Ah well, I've salvaged some spares...back to the small ads/car boot sales/eBay to find a working one...

HopperJF
07-03-2004, 12:17 PM
ooh unlucky , I didn't think it would be that serious :-(
Well good luck in finding replacements anyway,

Mike.

BoingBoss
07-04-2004, 03:43 AM
If you send me the rom switcher, I will ship to you a Kickstart 3.1 ROM and the 6 Workbench 3.1 disks for your Amiga 500. At least this way your Amiga 500 will work again. :-D