PDA

View Full Version : Scandoubler Compserv LCD TFT MONITOR?

Blendor_POLAND
08-28-2011, 01:32 PM
Hallo
I have a question, Compserv Scandoubler works with lcd monitor?
tone007
08-28-2011, 02:10 PM
Yes, though PAL (50Hz) modes may cause trouble with LCD monitors that don't support it, as with any other scandoublers besides Indivision.
Blendor_POLAND
08-29-2011, 06:59 AM
thanks ;) for your answer
Crumb
08-29-2011, 08:51 AM
@tone007

Indivision *and* Picasso4 ;-)
tone007
08-29-2011, 09:10 AM
Ooo, didn't know a PIV would take care of that too, good info.
Blendor_POLAND
08-29-2011, 09:19 AM
indivision aga4000 is not available :(( in amigakit.com :((( picasso IV is not in my budget
zipper
08-29-2011, 09:24 AM
Ooo, didn't know a PIV would take care of that too, good info.

50 - 160 Hz AFAIR - adjustable via PMTNG.
Blendor_POLAND
08-29-2011, 09:36 AM
and MONITOR LCD with TV ? for example Samsung Syncmaster710mp maybe work with Compserv Scandoubler in PAL GAMES 50hz?


I found one Monitor LCD with work 47-86hz

MODEL: ColorEdge CG223W EIZO
zipper
08-29-2011, 10:12 AM
That Samsung specs seem to be 56 - 75 Hz; can't say what it does with a PAL
feed into the inputs: "RGB Analog, Separate H / V sync, Composite ,
0.7Vp-p Positive at 75 ohm, TTL level positive or negative". But as it supports PAL,Secam and NTSC it should work.
zipper
08-29-2011, 10:15 AM
I found one Monitor LCD with work 47-86hz
MODEL: ColorEdge CG223W EIZO

Most BenQs start from 24 kHz like mine - it supports even 44 Hz and upto 75 Hz in 3 steps.
Blendor_POLAND
08-29-2011, 11:44 AM
this means that the monitor like Yours, work no problem with SC ARXON COMPSERV in 50hz PAL GAMES ? sorry mein english is no good:)

what model You have?
amiga4000freak
08-29-2011, 12:09 PM
hi

Synchronization Range - Horizontal31 - 81 kHz is this what you mean because there is one on ebay but has only got a responce time of 25ms
bbond007
08-29-2011, 12:49 PM
indivision aga4000 is not available :(( in amigakit.com :((( picasso IV is not in my budget

I have been wanting an Indivision AGA for years now... Just not willing to pay EBAY prices.

You could always sell the scandoubler and get the Dell SR2320L monitor. I just got this monitor and I'm very happy with it for use with my A1200.

http://www.amiga.org/forums/showthread.php?t=58860
Blendor_POLAND
08-29-2011, 01:11 PM
its great :) LCD multisync , but is not available in polish allegro or ebay