PDA

View Full Version : Will this run MorphOS?


curtis
10-09-2010, 07:21 PM
I picked up a very nice Mac G4 Model M5183 (Sawtooth I believe). It appears to be stock.

If it won't run MorphOS natively, would it be worth/feasible to upgrade it where it can run MorphOS?

This'll give me something to do while I try to figure out why my Minimig died!

Curtis

actung_bab
10-09-2010, 07:55 PM
not sure on the morphos l know there porting over to other models of mac
the mac mini l had same problem l had buy another one with mine what thought was just
defective power switch turned out to need new logic board (motherbaord)
was going cost nz 400.00 which was how musch it cost .
l have read where thye say dont know how true this is replacing the capacitors
fixs some l whould not like to try as looks night mare to work on

Piru
10-09-2010, 08:11 PM
I picked up a very nice Mac G4 Model M5183 (Sawtooth I believe). It appears to be stock.
It will run MorphOS.

Piru
10-10-2010, 02:46 AM
We just released MorphOS 2.6 with Power Mac support, including support for this model.

Head to http://www.morphos-team.net/ for the ISO.

Fingers
10-10-2010, 04:43 AM
We just released MorphOS 2.6 with Power Mac support, including support for this model.

Head to http://www.morphos-team.net/ for the ISO.

Good news, I was only checking earlier today for an update :)

Funny thing though...the Features pages says "new Sputnic with extensive Java support", however there is no trace of Sputnic at all on the ISO/CD? Quite odd...

PZ.

Piru
10-10-2010, 04:46 AM
Funny thing though...the Features pages says "new Sputnic with extensive Java support", however there is no trace of Sputnic at all on the ISO/CD? Quite odd...
It was replaced by OWB, which is much more mature browser.

That part of the web page is from MorphOS 2.0 era. I'll talk about updating it, but doing that would require ton of changes and I don't think anyone would feel particularly energetic about that right now :-)

Andre.Siegel
10-10-2010, 04:47 AM
Good news, I was only checking earlier today for an update :)

Funny thing though...the Features pages says "new Sputnic with extensive Java support", however there is no trace of Sputnic at all on the ISO/CD? Quite odd...

PZ.

The features page specifically mentions the following: "Below you will find an extensive list about the work that went into MorphOS 2.0."

Obviously, there are differences between MorphOS 2.6 and MorphOS 2.0. If you would like to know what was changed between these two OS versions, feel free to read all the release notes which are linked to from the features page.

Fingers
10-10-2010, 05:01 AM
Ah ok, thanks guys :)

I'm already using OWB 1.9 so everything is cool.

Obviously I have misinterpreted what was written.

PZ.

Karlos
10-10-2010, 05:50 AM
That part of the web page is from MorphOS 2.0 era. I'll talk about updating it, but doing that would require ton of changes and I don't think anyone would feel particularly energetic about that right now :-)

It's not static, is it?

Boot_WB
10-10-2010, 06:13 AM
@Karlos

It is, but only relates to the 2.0 release.
Supplemental release notes are linked-to at the top of the release-notes page (http://www.morphos-team.net/releasenotes-2.0.html).

Regards



Rich

curtis
10-10-2010, 01:12 PM
COOL!!!

Now to d/l and start playing!

Curtis

We just released MorphOS 2.6 with Power Mac support, including support for this model.

Head to http://www.morphos-team.net/ for the ISO.

Jeff
10-17-2010, 10:36 AM
I tried MorphOS 2.6 on my G4 "Digital Audio" 533 and the install CD boot process hangs at the Open Firmware screen with an error. The same CD boots fine on my Mini. Anyone have any ideas? I already have it reg'ed for the Mini and it flies.

I always wanted a MDD and I'll probably buy one for MOS but I wanted to test it on what I already have first.

Thanks - Jeff

nicholas
10-17-2010, 11:44 AM
It was replaced by OWB, which is much more mature browser.

That part of the web page is from MorphOS 2.0 era. I'll talk about updating it, but doing that would require ton of changes and I don't think anyone would feel particularly energetic about that right now :-)

I don't mind updating it for you if you want, I'm off work atm and bored out of my mind! :)

Fab
10-17-2010, 12:31 PM
I tried MorphOS 2.6 on my G4 "Digital Audio" 533 and the install CD boot process hangs at the Open Firmware screen with an error. The same CD boots fine on my Mini. Anyone have any ideas? I already have it reg'ed for the Mini and it flies.

I always wanted a MDD and I'll probably buy one for MOS but I wanted to test it on what I already have first.

Thanks - Jeff

It appears you ran into a known issue with the 7410 G4 model. The next MorphOS update should address this issue.

Iggy
10-17-2010, 01:17 PM
I tried MorphOS 2.6 on my G4 "Digital Audio" 533 and the install CD boot process hangs at the Open Firmware screen with an error. The same CD boots fine on my Mini. Anyone have any ideas? I already have it reg'ed for the Mini and it flies.

I always wanted a MDD and I'll probably buy one for MOS but I wanted to test it on what I already have first.

Thanks - Jeff

I thought my Quicksilver was hanging too. I got the Openfirm, Console failed messages (followed by some CPU and Memory spec).

After brainstorming this, I started trying different DVD drives. The third drive I tried load this OS correctly (ewho knows why).
Keep trying! This is one cool OS. Very responsive. For some reason it feels faster than Windows on my 3.0 Ghz Dual core machine.

Absolutely ther best PPC OS for the Amiga community.