View Full Version : SCSI 1 vs SCSI2 are the connectors the same?
12-13-2002, 05:29 AM
Installing a warp engine for the in 4000 in an a3000d..
Can an external connector from an old enclsure work:
12-13-2002, 05:40 AM
Normally SCSI I equipment uses a 50pin centronics-style connector (the type with the wire clips) or a 25pin D connector (this is what the A3000's built-in has).
SCSI II usually uses a high denisty 50pin connector (I'm not certain which type the WarpEngine external SCSI is, IIRC you needed an extra cable with an external connetor on it) so you will probably need a new cable with a HD 50 connector to connect from the Warp Engine's external connector to your external exclosure otherwise it should work fine.
There's some more information on Warp Engine SCSI configuration at the Big Book of Amiga Hardware (http://hard-ware.de/amiga).
vBulletin® v3.8.4, Copyright ©2000-2013, Jelsoft Enterprises Ltd.