It's not dead :-)

[A4000_Mad]

Hi Guys,

A computer friend who isn't into Amigas gave me an IBM Ultrastar 18.2GB 68p Ultra3 SCSI drive that he'd found amongst his stuff. It fitted straight onto my CSPPC and I thought I finally had a nice drive for running OS4 in my A4000.

However, when I switch on it doesn't spin up. Any chance a wrong jumper setting could stop it spinning up, or is most likely to be dead?

Model of drive is DDYS-T18350

thanks

[Colani1200]

Those Ultrastars have a spinup jumper indeed. It is on the jumper block underneath the drive PCB if I remember correctly.

EDIT: Read the manufacturer docs (http://www.hitachigst.com/tech/techlib.nsf/techdocs/85256AB8006A31E587256A78005A3610/$file/ddys_sp21.PDF) where to find it (but ususally that's easy, all the jumpers should be labeled).

[countzero]

you should also know that the CSPPC scsi controller is pretty anal about termination. You should have active terminators on the both ends of the chain.

[A4000_Mad]

Thank you very much guys :-)

I put a jumper on 'ENABLE AUTO SPIN' and I'm now booting into OS4 :banana:

:cheers: