Would one of those work with an USB-Amiga?

[Dandy]

Would one of those work with an USB-equipped Amiga?

USB2IDE/SATA adaptor (http://search.stores.ebay.de/lets-sell_ide_W0QQfsubZ1370439QQsaselZ17619204)

:-?

[Kronos]

Basicly the same you'll find in most external HDs these days.

Which means it should work with massstorage.device, but should ain't allways does ......

[bloodline]

Kronos wrote:
Basicly the same you'll find in most external HDs these days.

Which means it should work with massstorage.device, but should ain't allways does ......

Sorry OT: Where on earth have you picked up this ghastly "ain't" word from? :-D

[Gilloo]

Dandy wrote:
Would one of those work with an USB-equipped Amiga?

USB2IDE/SATA adaptor (http://search.stores.ebay.de/lets-sell_ide_W0QQfsubZ1370439QQsaselZ17619204)

:-?

As long as there is an interface such Class=8, SubClass=6, Protocol=80, the stack is able to bind it as disk via massstorage.device

[darksun9210]

so in basic terms.

"yes, it should, but as always, your mileage may vary" ;)

[alexh]

I designed the chips in most of those ;-)

The Oxsemi chips work with Poseidon, even with the new Zorro III Deneb USB 2.0 High Speed card.

If you can see if it has an Oxsemi chip in it you know it will work.

[bloodline]

alexh wrote:
I designed the chips in most of those ;-)

The Oxsemi chips work with Poseidon, even with the new Zorro III Deneb USB 2.0 High Speed card.

If you can see if it has an Oxsemi chip in it you know it will work.

Did you make the Firewire chip in my WD MyBook? If so, it seems to work... ;-)

[bloodline]

alexh wrote:
I designed the chips in most of those ;-)

The Oxsemi chips work with Poseidon, even with the new Zorro III Deneb USB 2.0 High Speed card.

If you can see if it has an Oxsemi chip in it you know it will work.

Hey Alex, I cracked open my Firewire Westen Digital MyBook... and it's got an Oxsemi chip in there :-)