Wanky lines on LCD fixed

[hamtronix]

this may be a combination of hardwar/software/lcd screen that may only apply to me but if it helps one other person than that person has been helped:

Going from my A2300 Genlock color composite out to a small LCD with regular RCA cable.

I was getting wanky straight lines- bent with steps, weird coloration, etc.

I found that by switching to interlace and then back to normal mode so I can read it (it is only an 8.1 inch monitor/tv) that it resolves correctly. Looks great in fact. Hope this helps someone

[countzero]

Let's get this straight. An A2320 is not a genlock. It's a scandoubler (http://amiga-hardware.com/showhardware.cgi?HARDID=360). The genlock is A2300 (http://amiga-hardware.com/showhardware.cgi?HARDID=393). If your card has composite out, it's a genlock, hence, A2300.

[hamtronix]

countzero wrote:
Let's get this straight. An A2320 is not a genlock. It's a scandoubler (http://amiga-hardware.com/showhardware.cgi?HARDID=360). The genlock is A2300 (http://amiga-hardware.com/showhardware.cgi?HARDID=393). If your card has composite out, it's a genlock, hence, A2300.


Yep you are right